Caterpillar
RELIABILITY
The drawbar, circle and shield assembly remains in a condition similar to that of the factory outlet, which allows precision leveling passage after passage.
The structure of the machine is designed for a long service life. It is designed to use several types of work tools, such as a front blade.
A safety clutch option protects the circle drive if the machine hits a stationary object.
The front axle maximizes bearing life while minimizing maintenance.
Reduce the daily grease requirements and costly repairs to your hoop and pinion with the Circle Saver option.
POLYVALENCE
Improve the performance and efficiency of your machine with the counterweight option or thrust block.
Ripper and scarifier options are available and assist the driver in hard ground leveling.
The front lift set option is ready for equipment such as straight or angled blades.
For better road coverage, add a shield extension to add 605 mm (24 in).
| Base Power (1st Gear) - Net | 132 kW |
| Lever/Steering Wheel Weight* Tier 4 | 15906 kg |
| Weight* | 16620 kg |
| Blade Width | 3.7 m |
| Blade Tip Range - Backward | 5 |
| Blade Tip Range - Forward | 40 |
| Blade Tip Range Backward | 5 |
| Blade Tip Range Forward | 40 |
| Circle Center Shift Left | 656 mm |
| Circle Center Shift Right | 656 mm |
| Circle Center Shift Right | 656 mm |
| Circle Centershift - Left | 752 mm |
| Circle Centershift - Right | 728 mm |
| Maximum Depth of Cut | 775 mm |
| Maximum Lift Above Ground | 480 mm |
| Maximum Shoulder Reach Left | 1764 mm |
| Maximum Shoulder Reach Outside of Tires - Left | 1764 mm |
| Maximum Shoulder Reach Outside of Tires - Right | 1928 mm |
| Moldboard Sideshift - Left | 512 mm |
| Moldboard Side Shift Right | 663 mm |
| Moldboard Sideshift - Left | 663 mm |
| Moldboard Sideshift - Right | 512 mm |
| Basic Blade Width | 3556 mm |
| Length of Machine* | 9838 mm |
| Maximum Height | 3832 mm |
| Note | *Typically equipped with push block and ripper. |
| Width | 2592 mm |
| Width All Wheel Drive (AWD) | 100.4 in |
| All-Wheel Drive Net Power Range (Tier 3) | NaN kW |
| All-Wheel Drive Net Power Range (Tier 4) | NaN kW |
| Bore | 105 mm |
| Derating Altitude | 4500 m |
| Derating Altitude (AWD) | 1676 m |
| Displacement | 7.01 l |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV - U.S. EPA Tier 3/EU Stage IIIA |
| Engine Model | Cat 7.1 |
| Engine RPM | 2,200 |
| Maximum Torque | 1245 N-m |
| Maximum Torque - AWD On | 828 N·m |
| Maximum Torque - ISO 9249 | 889 N·m |
| Net Power - EEC 80/1269 | 186 kW |
| Net Power - ISO 9249/SAE J1349 | 186 kW |
| Net Power Range (Tier 3) | NaN kW |
| Net Power Range (Tier 4) | NaN kW |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
| Number of Cylinders | 6 |
| Standard Capability | 50 °C |
| Stroke | 135 mm |
| Torque Rise - ISO 9294 | 42% |
| All-Wheel Drive (AWD) Weight | NaN kg |
| Joystick All-Wheel Drive (AWD) Weight* Tier 3 | 16499 kg |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 | 16713 kg |
| Joystick Weight* Tier 3 | 15824 kg |
| Joystick Weight* Tier 4 | 16038 kg |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 3 | 16454 kg |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 | 16661 kg |
| Lever/Steering Wheel Weight* Tier 3 | 15699 kg |
| Note | *Typically equipped with push block and ripper. |
| Note (1) | *Typically equipped with push block and ripper. |
| Arc Radius | 413 mm |
| Blade Height | 610 mm |
| Cutting Edge | 152 mm |
| Cutting Edge Width | 152 mm |
| End Bit | 152 mm |
| Throat Clearance | 112 mm |
| Circle Drive | 7 l |
| Cooling System | 57 l |
| DEF Tank | 12.5 l |
| Front Wheel Spindle Bearing - Each | 0.5 l |
| Fuel Tank | 378 l |
| Hydraulic System | 55 l |
| Circle Drive | 7 l |
| Circle Drive with Slip Clutch | 7 l |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 15 l |
| Transmission and Differential | 34 l |